Landscape Design Software by Idea Spectrum
Realtime Landscaping Pro Landscape Design Software

Contents  Index  Previous  Next 

Selecting Points

To move, rotate, or scale points, or to change point-specific properties, the points must first be selected. There are several ways points can be selected, depending on what you want to do.

Selecting Points

To select points one at a time:

1.   Position the cursor over the point.

2.   Click to select the point. All other points will be automatically deselected.

3.   If you want to select another point, repeat the above steps while pressing and holding Shift.

To select points using a selection rectangle:

1.   Pan and/or zoom out until the points you want to select are fully inside the view.

2.   Click and drag to draw the selection rectangle. The rectangle must fully surround the points you want to select. When you release the left mouse button, the points will be selected.

To select all points in the object:

1.   Select Edit > Select all.

2.   All points in the object will be selected.

Deselecting Points

To deselect points one at a time:

1.   Position the cursor over the point you want to deselect.

2.   Press and hold Shift.

3.   Click to deselect the point. Each time you click the point, its selection status will toggle on or off.

4.   Repeat for each point you want to deselect.

To deselect all points:

1.   Select Edit > Select None.

- OR -

1.   Position the cursor anywhere but over a point (the cursor will change to a small arrow).

2.   Click to deselect all points.

To undo any selection change, click Undo.

Unselected points are yellow; selected points are red. The following is an example of a deck with two selected points.

See also:

Editing Points
Moving Points
Rotating Points
Scaling Points
Inserting & Deleting Points
Using Automatic Dimensions
Undoing and Redoing Changes

Home | Product Comparisons | How we are Different | About Us | Support | Site Map | Contact Us | Links
Copyright © 2022 Idea Spectrum. All rights reserved.